๐Ÿ“ Katy, TX 713-240-6473 Monโ€“Fri 8:00 AM โ€“ 6:00 PM

Banners.

Two production formats covering the core of our banner work - single-sided 13 oz vinyl for everyday jobs and perforated mesh for high-wind and building-scale installs. Reinforced hems and grommets are standard; alternate finishing always available on request.

01 ยท Single-Sided 02 ยท Mesh
ยง 01 ยท The workhorse
13 oz scrim vinyl ยท Most-ordered

Single-Sided Vinyl Banners

The everyday workhorse - 13 oz scrim vinyl printed full color on one face with reinforced hems and grommets at 24-in spacing. The default pick for grand openings, sponsor walls, event backdrops, and any install where only one face is visible. Indoor or outdoor, 12 to 18 months of color hold without lamination.

Substrate

13 oz scrim-reinforced PVC banner, matte or gloss finish.

Print method

UV-curable inkjet, full color CMYK.

Finishing (standard)

Heat-welded hem all sides, grommets every 24 in.

Max single-piece

Up to ~16 ft on the short edge.

Outdoor life

12โ€“18 months unlaminated. Optional UV laminate extends to 3+ yrs.

Lead time

2โ€“3 business days standard. Next-day rush on small sizes.

Good for

Grand openings ยท Retail promotions ยท Event backdrops ยท Sponsor walls ยท Construction-site project banners ยท Real-estate exterior listings ยท School and church campaign banners

13 oz VinylHem + GrommetsOutdoorIndoorNext-Day Rush
ยง 02 ยท Wind-passing
Perforated PVC mesh ยท Building-scale

Mesh Banners

Perforated PVC mesh that lets wind pass through, reducing the load on the banner and on whatever's holding it. Required on any banner over ~10 ft exposed to highway-speed wind or installed on scaffolding above grade. Resolution drops slightly because of the open weave, but at building-scale viewing distance the visual difference disappears.

Substrate

8 oz perforated PVC mesh, roughly 30% open area.

Print method

UV-curable inkjet with backer paper to prevent bleed-through.

Viewing distance

Best read at 10+ ft. Avoid for close-read text.

Hardware

Reinforced hem + grommets, pole pockets, or keder edges.

Wind load

Dramatically lower than scrim - safe on scaffolding wraps.

Lead time

3โ€“4 business days standard.

Good for

Construction-scaffolding wraps ยท Building-side banners over 10 ft ยท Highway overpass and fence banners ยท Stadium fence wraps ยท High-wind exposure on coastal sites ยท Tower crane signage

Wind-PassingBuilding SideStadiumScaffolding

What to send us for a banner job

  • Vector preferred - AI, EPS, or PDF/X with all fonts converted to outlines or embedded.
  • Raster minimum - 100 DPI at finished size for outdoor banners; 150 DPI for indoor where close-read text matters.
  • Bleed - 2 in around for hemmed banners (we fold the bleed into the hem); 0.5 in for pole pockets.
  • Hem & grommet preference - call out non-standard spacing on the order if you need it (default is grommets every 24 in).
  • Pole pocket sleeves - give us the bracket diameter or pole circumference and we'll size the pocket correctly.
  • Upload through our artwork uploader (files up to 2 GB) or email info@pspimaging.com.

Ready to quote your banner job?

Send us the dimensions, mounting style, and your artwork - we'll come back with pricing and a lead time within one business day.

Request a Quote Wholesale Quote Builder ๐Ÿ“ž 713-240-6473