Katy, TX 713-240-6473 Mon–Fri 8:00 AM – 6:00 PM Track Order

The materials we print on.

Every film, vinyl and fabric we run, roll to roll, up to 16 ft 4 in on the short edge. Each one shows the finishes we offer and how long it takes from approved artwork.

Backlit flex face

Which one? Cooley, unless a spec names 3M, you want the 3M™ MCS™ Warranty, or your short side is 165 in. Both print the same way and ship in the same 3 to 5 days. The two samples are drawn the same way, so they do not show how the films differ: see Which flex face?, the full Cooley vs 3M comparison, or ask for printed swatches.

Cooley 20 oz backlit flex face material sample (sample artwork) Cooley 20 oz backlit flex face material sample, backlit (sample artwork)

Cooley 20 oz backlit flex face

The everyday flex face: the lower cost, rolls from 78 in so small cabinets trim less, and NFPA 701 and California State Fire Marshal fire ratings.

Finishes
Lamination, gloss or matte included
Lead time
3 to 5 business days
3M Panagraphics III flex face material sample (sample artwork) 3M Panagraphics III flex face material sample, backlit (sample artwork)

3M Panagraphics III flex face

For a spec that names 3M, a 165 in short side (3M only; rolls from 126 in), or fluorescent-lit cabinets. Faces on 3M Panagraphics III can carry the 3M™ MCS™ Warranty, ink included, with seam and blowout cover.

Finishes
Lamination, gloss or matte included
Lead time
3 to 5 business days

Banners and mesh

Mesh banner material sample (sample artwork)

Mesh banner

Fences, scaffolding and building wraps: the open weave lets wind through where solid vinyl would catch it.

Finishes
Grommets includedHemming +$0.50/sq ftExtra grommets +$0.40/ft of edgePole pockets (top & bottom) +$0.25/sq ft
Lead time
3 to 4 business days

Billboards

9 oz scrim billboard vinyl material sample (sample artwork)

9 oz scrim billboard vinyl

Billboard faces for bulletin and poster structures, finished with pole pockets or grommets to the structure.

Finishes
Grommets includedHemming +$0.50/sq ftPole pockets (top & bottom) +$0.25/sq ft
Lead time
5 to 7 business days

Window graphics

Window vinyl material sample (sample artwork)

Window vinyl

Printed adhesive graphics for storefront, office and door glass.

Finishes
No add-on finishes
Lead time
3 to 5 business days
One-way perforated window film material sample (sample artwork)

One-way perforated window film

Storefront and office windows: a full graphic from outside, a clear view out from inside. Applied to the outside of the glass.

Finishes
No add-on finishes
Lead time
3 to 4 business days
Second-surface perforated window film material sample (sample artwork)

Second-surface perforated window film

The same see-through perforated film, printed in reverse and applied to the inside of the glass, where weather, cleaning and vandals cannot reach the print.

Finishes
No add-on finishes
Lead time
3 to 4 business days
Static cling material sample (sample artwork)

Static cling

Removable window graphics with no adhesive: seasonal promotions, sale signs and hours, and leased storefronts.

Finishes
No add-on finishes
Lead time
2 to 3 business days
Optically clear window film material sample (sample artwork)

Optically clear window film

Clear film that shows only the printed art on the glass, for storefront branding, offices and lobbies.

Finishes
No add-on finishes
Lead time
3 to 5 business days

Vinyl prints

Calendared vinyl (3M IJ35) material sample (sample artwork)

Calendared vinyl (3M IJ35)

Calendared adhesive vinyl for flat surfaces: walls, doors, displays and short to mid-term signage.

Finishes
Lamination, gloss or matte +$1.50/sq ft
Lead time
3 to 5 business days
Translucent vinyl material sample (sample artwork) Translucent vinyl material sample, backlit (sample artwork)

Translucent vinyl

Translucent adhesive vinyl for lit faces and light boxes, applied to the panel the light shines through.

Finishes
Lamination, gloss or matte +$1.50/sq ft
Lead time
3 to 5 business days

Tradeshow

SEG dye-sub fabric material sample (sample artwork)

SEG dye-sub fabric

Dye-sublimated tradeshow fabric with a silicone edge that presses into slim aluminum frames, from inline booths to island walls.

Finishes
Set with your quote
Lead time
5 to 7 business days

Awnings

Printed awning vinyl material sample (sample artwork)

Printed awning vinyl

Printed awning covers for storefronts, non-illuminated or backlit (lit from inside the frame).

Finishes
Set with your quote
Lead time
Non-Illuminated Awning Vinyl: 7 to 10 business daysBacklit Awning Vinyl: 10 to 14 business days, frames included

3M, MCS and Panagraphics are trademarks of 3M. 3M supplies its warranty; PSP Imaging makes the finished graphics and is not an agent of 3M.

Want it in hand first?

Wholesale accounts can request material swatches: printed samples of the films and fabrics above, for a client presentation or before a large run.

Request swatches Open a wholesale account 713-240-6473

Images are product illustrations with sample artwork.